Welcome to the guide on Aube programmable thermostats, designed to optimize energy efficiency and provide precise temperature control. These thermostats offer user-friendly interfaces, programmable settings, and multiple operation modes to suit your needs.
Installation Instructions
Start by turning off the power supply. Ensure compatibility with your heating system. Install the power base and configure DIP switches. Mount the thermostat and connect wires carefully. Follow the manual for precise setup.
Compatibility and Safety Precautions
Ensure the Aube thermostat is compatible with your heating system, such as electric baseboard heaters or radiant floors. Check voltage requirements and wiring configuration. Always turn off power before installation. Avoid exposing the thermostat to direct sunlight or moisture. The device is designed for indoor use only. Handle electrical components with care to prevent damage. Keep the thermostat away from children and pets. If unsure about compatibility or installation, consult a licensed electrician. Follow all safety guidelines to ensure proper function and avoid hazards. Adhere to local electrical codes and manufacturer recommendations for a safe and efficient setup.
Step-by-Step Installation Guide
Begin by turning off the power to your heating system at the circuit breaker. Remove the old thermostat and label the wires for identification. Mount the new Aube thermostat base on the wall, ensuring it is level and securely fastened. Connect the wires to the corresponding terminals, following the user manual’s wiring diagram. Install the thermostat head onto the base, ensuring it clicks into place. If applicable, install the power base according to the manufacturer’s instructions. Restore power and test the thermostat by setting a temperature and observing the system response. Program your desired settings, such as schedules and temperature limits, using the control panel. Refer to the manual for specific button functions and programming instructions. Ensure all connections are secure and double-check your work for safety and proper operation.
Configuration Settings
Configure your Aube thermostat by setting the clock, day, and temperature preferences. Adjust heating and cooling settings separately, and select between scheduled or manual modes for optimal energy management.
Setting the Clock and Day
To set the clock and day on your Aube programmable thermostat, press the DAY, HOUR, and MIN buttons to adjust the time. Ensure the correct day is selected for accurate scheduling. After setting, the thermostat will automatically synchronize with your programmed settings, enabling precise temperature control throughout the day. Proper time and day configuration is essential for efficient operation and energy savings.
Adjusting Temperature Settings
Your Aube programmable thermostat allows you to set precise temperature levels for both heating and cooling modes. To adjust the temperature, press the MODE button until the desired setting (heating or cooling) appears. Use the up or down arrows to increase or decrease the temperature. For energy efficiency, program separate settings for heating and cooling, as their economic goals differ (reducing heat vs. increasing cooling). You can also use preset temperatures by pressing the (.) buttons. The thermostat will maintain the selected temperature until the next scheduled change. For extended absences, enable vacation mode to maintain a consistent energy-saving temperature. After a power outage, the thermostat will retain your settings and resume operation in the last mode used, ensuring uninterrupted control over your environment.
Modes of Operation
Aube programmable thermostats operate in automatic and manual modes, allowing you to set schedules or adjust temperatures instantly. They also retain settings after power outages, ensuring consistent energy optimization.
Scheduled Mode
Scheduled mode allows you to program specific temperature settings for different times of the day, optimizing energy usage and comfort. Set temperatures for wake-up, leave, sleep, and return times to align with your daily routine. This mode is ideal for maintaining consistent energy efficiency while ensuring your home remains comfortable. Program schedules for weekdays and weekends separately, or use the same schedule for all days. The thermostat will automatically adjust temperatures according to your predefined settings. By programming your schedule, you can reduce energy consumption during periods when heating or cooling is not needed. This feature ensures your system operates efficiently, saving you money on utility bills. Scheduled mode is a key function of Aube programmable thermostats, designed to simplify temperature control and enhance energy savings.
Manual Mode
Manual mode allows you to set a constant temperature without following a programmed schedule. This mode is ideal for temporary adjustments or when you prefer not to follow a preset routine. To activate manual mode, press the MODE button until the manual mode indicator appears on the display. Use the temperature adjustment buttons to set your desired temperature. The thermostat will maintain this temperature until you change it or switch to another mode. Manual mode is straightforward and provides immediate control over your heating or cooling system. It is useful for overriding scheduled settings or for periods when you need consistent temperatures. Once in manual mode, the thermostat will not automatically adjust based on time or predefined settings, giving you direct control over your environment. This feature ensures flexibility and ease of use when you need it most.
Power Outage Recovery
Aube programmable thermostats are equipped with a power outage recovery feature, ensuring uninterrupted operation after a power failure. Once power is restored, the thermostat automatically resumes its previous settings, including the mode and temperature. This feature prevents the need to reprogram the device, saving time and effort. Additionally, some models offer a memory recall option, which retains programmed schedules even during prolonged outages. The thermostat will return to its last operating mode and temperature, maintaining your preferred comfort levels seamlessly. This functionality ensures consistent heating or cooling performance, even after a power interruption. With Aube’s power outage recovery, you can enjoy peace of mind knowing your settings are preserved and your system operates efficiently.
Troubleshooting Common Issues
Experiencing issues with your Aube programmable thermostat? Start by checking the power supply and ensuring it is properly connected. If the display is blank, verify that the circuit breaker has not tripped. For temperature inaccuracies, ensure the thermostat is calibrated correctly and not exposed to direct sunlight or drafts. If the thermostat is unresponsive, try resetting it by removing the batteries or switching off the power at the circuit breaker for 30 seconds. Programming errors can often be resolved by revisiting the setup process and ensuring all schedules are correctly entered. For recurring issues, consult the user manual or contact customer support for further assistance. Regular maintenance, such as cleaning the thermostat and updating settings, can also prevent many common problems.
Technical Specifications
Aube programmable thermostats are designed for compatibility with a wide range of heating and cooling systems, including electric baseboard heaters, radiant floors, and forced air systems. Models such as the TH115, TH141A-HC-28, and TH232-AF-230 operate within a temperature range of 32°F to 90°F (0°C to 32°C) and support both heating and cooling systems. These thermostats feature an LCD display and touch-sensitive controls for easy navigation. They are powered by 2 AA batteries or can be hardwired (24V AC). The devices include memory retention to save settings during power outages and are certified by UL and cUL for safety. With a compact design and versatile functionality, Aube thermostats are suitable for residential and light commercial applications, ensuring efficient temperature control and energy savings.
Warranty Information
Aube Technologies Inc. provides a limited warranty for its programmable thermostats, ensuring protection against defects in materials and workmanship for a period of one year from the date of purchase. This warranty applies to all models, including the TH115, TH141A-HC-28, and TH232-AF-230, and covers repairs or replacements at no additional cost. For more details, refer to the official warranty document available on the Aube Technologies website.
References and Further Reading
For comprehensive guidance on Aube programmable thermostats, refer to the official user manuals and guides available on the Aube Technologies website. Detailed installation, configuration, and troubleshooting instructions can be found in the PDF manuals for specific models such as the TH115, TH141A-HC-28, and TH232-AF-230. Additionally, the website provides technical specifications, warranty details, and operational insights to help users optimize their thermostat’s performance. For further assistance, explore the resources section, which includes troubleshooting tips and advanced features for programmable models.